Latest product information are listed as following.

Synchronous Equipment timing source Module .

This module revolutionizes SONET/SDH Network synchronization be by replacing cumbersome and expensive multi-chip configuration with a single module solution. Until now a typical synchronization standard consisted of dozen or more complex hardware ICs and DSP software in a layout sensitive time consuming , large footprint custom design .the Sonet timing Module sets a new standard in integration ,performance and simplicity of design . Configuration setting of this module is very simple and easy interface. This module can be use in different applications such as routers, base stations, concentrators, ATM hubs and operate across a range of standards SONET,SDH,ATM Stratum 3,Statum 4 ..

Digital Panel Meter

Low cost Digital Panel Meter (DPM) is completely Isolated 12 bit ADC I/O measurement

device with 4-1/2 digit large

LCD displays. DPM can

be configured to receive 

input signal in Volts 

or Current.

Applications:

Industrial, Instrumentation,

Communication, Robotics,

 Industrial Panels, 

and medical systems.

Confined version is available

for military and space

 harsh environments. 

Optics Block

Cross-Connect ASIC

Cross-Connect ASIC is an integrated circuit targeting SONET/SDH applications. Cross-Connect ASIC allows non-blocking switching of tributaries within one OC-192 stream from line side & four OC-48's stream or sixteen OC-12's stream from system side.  Any tributary entering on either stream can be connected to any same size tributary within either outgoing stream. This integrated chip cross-connects mix of SONET ( T1, T2 or STS-channels) as well as SDH ( TU-11, TU-12 channels). Cross-Connect ASIC operates at 3.3/1.8 Volts using single internal/external 77.76MHz clock. Full parity checking and generation is supported on input/output data buses. The device offers 8/16/32 bit data bus for interfacing with processor/DSP for device operating configuration. Stand alone core can be integrated to FPGA as net list black Box or RTL Code.

 

PCI Mezzanine Card for Biomedical application

 PCI Mezzanine Card, PMC, offers four servo controllers built  for supporting
today's complex industrial and biomedical needs. This single board
controller consists of  8 channels of 16bits resolution ADC,  plus  8
channels of 12bits DAC  supporting applications in precise motion
control requirements.

Operating Voltage: 3.3/1.8 Volts   PCI bus interface: 32 bits, 33MHz.
 

PMC DDRAM

This PCI base dual data relate ram controller successfully operates at 133MHz rate .this product is based on our PCI core plus DDRAM controller it is the best solution for today's High speed data crunching application . For more details send us an email so we can help you to deliver your products out the door.

Application:
PCI Mezzanine Card for Biomedical application
PCI Mezzanine Card  Double Data Rate expansion RAM is designed for
high-speed applications operating at 32 bits data bus and 66MHz at PCI bus
interface. This module operates at 133 MHz internally offering 512M bits of
RAM capacity. Operating Voltage: 3.3/1.8 Volts
 

Verilog IP DDRAM Controller

          This Dual data rate Ram controller is optimized for 266 MHZ operation. This is a Verilog RTL base logic and it will come with complete test bench simulation. This is a risk free IP. System Interface can be customize to your requirements free on delivery.

Single board Computer

This single board computer will be a grate help to accelerate your prototype. From MPC8260 to IBM750, this board can be custom design for your needs. On the interface side we can provide you with 100mbps Ethernet or fast UART for craft port this board employee's very large FLASH DRAM SRAM and real time clock module. This a very low cost solution for today's fast to market demands. There are options available such keyboard, mouse, LCD, ... Contact us for more details on this product line.